5.3 Constrained actuator as ADN

5.3.1 Profile description

The profile defines constraint actuator that is powered by battery and intended to be used fro years after deployment without any human interference for maintenance. Therefore, the function of constraint actuator need to be very limited.

An actuator is intended to be receiving control command from CSE via notification or other means. The actuator then actuates according to the control command.

The actuator need to receive control command. As a result, the actuator need to be request reachable to receive notification or be able to start a polling channel.

5.3.2 Profile usage examples

Swithes deployed along the street light to switch on or off the street light remotely.

5.3.3 Fundamental feature sets

Table 5.3.3-1: Fundamental feature sets for constrained sensor as ADN

Function	Feature Set	Feature	Remark
GEN	AE/GEN/00001	At least one	Resource identifiers
GEN	AE/GEN/00002	AE/GEN/00002/00001	Support Create request targeting one resource
REG	AE/REG/00002	AE/REG/00002/00001	Create <AE> with mandatory attributes[2]
REG	AE/REG/00002	AE/REG/00002/00003	Create <AE> with pointOfAccess
SUB	AE/SUB/00001	AE/SUB/00001/00001	Create <subscription> with mandatory attributes [2]

5.3.4 ADN1-requestReachable

Table 5.3.4-1: Notification feature sets for constrained actuator as ADN

Function	Feature Set	Feature	Remark
SUB	AE/SUB/00004	AE/SUB/00004/00001	Receiving a notification

5.3.5 ADN1- pollingChannel

Table 5.3.5-1: Polling Channel feature sets for constrained actuator as ADN

Function	Feature Set	Feature	Remark
PCH	GE/PCH/00001	GE/PCH/00001/00001 GE/PCH/00001/00002 GE/PCH/00001/00003	Polling Channel resource management
PCH	GE/PCH/00002	GE/PCH/00002/00001	Long Polling Procedure